Round B

The bench/bike rack ROUND B is made in steel of 20/10 and 30/10 thickness.‎ It is made of 2 elements (which are quarter circle-shaped), each with 5 segments for the placement of the bikes.‎ On each one 10 steel plates of 60/10 thickness, with a main hole of 26 mm diam.‎ to hook the bike to the structure, are welded.‎ The 2 elements are covered with panels in steel of 20/10 thickness, welded through continuous welding, later polished.‎ Two quarter circle-shaped seats in exotic hardwood (40 mm thickness) are fixed to the 2 bike racks, supported by two structures.‎ The wooden seats are fixed to the load-bearing structure through specific screws, whereas the supports of the seats are fixed to the semicircular structure through M8 screws.‎ 2 steel plates of 30/10 thickness, with a hole of 11 mm diam.‎, are fixed to the base of the structure for the fixing to the ground through specific bolts (not provided).‎ The combination of bike racks and seats creates a semicircular treeguard, with outer diameter of 2000 mm and a central hole of 500 mm diameter.‎ For the fixing to the ground there are 4 plates of 30/10 thickness.‎, each one with a hole of 11 mm diam.‎ for the use of specific bolts (not provided).‎
For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and powder coating.‎ Such cycle is meant to guarantee the protection of the painted products, in an environment of C4 corrosion class, as requested by the UNI regulations EN ISO 12944-2.‎ The products are eventually polyester-powder coated with RAL colours at choice.‎
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.‎