Taxes and shipping calculated at checkout
Construction
The seat modules are built from under-seat beams in 40x40x2 mm Sendzimir galvanised steel square tube, with independent EN46100 die-cast aluminium slats set at a 93 mm pitch (80 mm slat plus 13 mm gap), finished in polyester powder coating. The side frames (legs) are made from 5 mm thick DD11 steel sheet, cold galvanised and finished in polyester powder coating. Ground-fixing anchors are not included, but glides are always supplied and must be fitted if the bench is not fixed to the ground.
Wood-effect sublimation
Available on flat slats, wedge-shaped flat slats (for curved benches), and slats with backrest. Not available on armrests, which are finished in the same colour as the structure. Due to the complex geometry of the slat with backrest, slight aesthetic irregularities in the sublimation pattern may occur; these are considered an intrinsic characteristic of the artisanal production process.
Leg options
Square leg
Trapezium leg
Infinity leg
Sustainability
Made in Italy from 100% recyclable aluminium and galvanised steel. Fully disassemblable at end of life for material recovery. Packaging is FSC-certified, and the modular design reduces component redundancy. Tested to UNI EN ISO 9227:2024, passing 600 hours of salt spray exposure.
Finishes
Metal: RAL 9005, Antracite, RAL 5023, RAL 9003, RAL 6005, RAL 6021, RAL 1019, RAL 7032, Corten, RAL 3009, RAL 3016, RAL 1004
Sublimated wood-effect: Frassino / Light Ash, Ciliegio / Cherry, Rovere / Dark Oak